公司资讯
  • 咨询热线:13932271419
  • 联系人:徐经理
  • Q Q:
  • 电 话:0312-3426976
  • 传 真:0312-3428285
  • 邮 箱:632469545@qq.com
  • 地 址:河北安国市石佛镇路景工业园区景旺路8号
公司资讯
怎么清洗中开双吸泵?
2019-03-27

陕西11选5走势图 有时候中开双吸泵使用一段时间后,它的泵轴会很脏,这时候就需要我们对其进行清洗,可是我们该如何清洗呢?下面我们就一起来看看。

  1、将中开泵轴承拆下检查时,先用摄影等方法做好外观记录。另外,要确认剩余润滑剂的量并对润滑剂采样,然后再清洗轴承。

  2、轴承的清洗分粗洗和精洗进行,并可在使用的容器底部放上金属网架。

  3、粗洗时,在油中用刷子等清除润滑脂或粘着物,此时若在油中转动轴承,注意会因异物等损伤滚动面。

  4、精洗时,在油中慢慢转动轴承,须仔细地进行。

陕西11选5走势图   5、通常使用的清洗剂为中性不含水柴油或煤油,根据需要有时也使用温性碱液等。不论使用哪种清洗剂,都要经常过滤保持清洁。

  6、清洗后,立即在中开双吸泵的轴承上涂布防锈油或防锈脂。


陕西11选5走势图 Sometimes the shaft of the double suction pump will be dirty after it is used for a period of time. At this time, we need to clean it, but how should we clean it? Now let's take a look.

1. When disassembling and inspecting the bearing of the middle-opening pump, the appearance record should be made by photography and other methods. In addition, it is necessary to confirm the amount of residual lubricant and sample the lubricant before cleaning the bearing.

陕西11选5走势图 2. The cleaning of bearings is divided into roughing and cleaning, and the metal grid can be placed at the bottom of the container in use.

陕西11选5走势图 3. When roughing, use brush to remove grease or adhesives in oil. If the bearings are rotated in oil, the rolling surface will be damaged by foreign bodies.

4. When cleaning, the bearings should be rotated slowly in oil, and carefully.

5. Normally used detergents are neutral non-aqueous diesel oil or kerosene. Temperature alkali liquor is also used when necessary. No matter which cleaning agent is used, it should be filtered regularly to keep it clean.

6. Immediately after cleaning, coat the bearing of the double suction pump with anti-rust oil or anti-rust grease.




数据提供:    
商盟客服

您好,欢迎莅临程跃泵业,欢迎咨询...

徐经理:
正在加载

触屏版二维码

分享到:QQ空间新浪微博腾讯微博人人网微信